Noted: Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the DOE and BCAP web sites.

New Hampshire adopted a mandatory statewide building code in 2002 based on the 2000 IECC. S.B. 81, enacted in July 2007, upgraded the New Hampshire Energy Code to the 2006 IECC. In December 2009, the New Hampshire Energy Code was again updated. The New Hampshire State Building Code Review Board adopted the IECC 2009 as the

Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the DOE and BCAP web sites.

The Massachusetts Board of Building Regulations and Standards has the authority to promulgate the Massachusetts State Building Code (MSBC). The energy provisions in the MSBC were developed by the Board's Energy Advisory Committee. The state's 351 cities and towns enforce the code. Only a building code board of appeals, consisting of specified technical members, may grant

Vermont's Clean Energy Development Fund (CEDF) was established in 2005 to promote the development and deployment of cost-effective and environmentally sustainable electric power and thermal resources -- primarily renewable energy and combined heat and power (CHP) technologies.

Funding Sources

From its establishment to 2012, the CEDF was supported via annual payments from Entergy (which owns the Vermont Yankee nuclear power plant). In return, under terms of two memoranda of understanding between Entergy and the Vermont Department of Public Service (DPS) that expired in March 2012, Entergy was permitted to store its own spent nuclear fuel at the Vermont Yankee site

NOTE: The new Energy Code became effective starting October 3, 2016. The NYS 2016 Uniform Code Supplement can be accessed at this link. 

Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the DOE and BCAP web sites.  

The Energy Conservation Construction Code of New York State (ECCCNYS) requires that all government, commercial and residential buildings, including renovations involving building system replacement, must follow the 2015 International Energy Conservation (IECC)

Los Angeles Department of Water and Power (LADWP) offers a variety of rebates for energy efficient equipment used in homes through the Consumer Rebate Program. For more information on these programs, review the program web site. The Consumer Rebate Program (CRP) by LADWP encourages residential customers to use energy-efficient products by offering rebates for items that exceed state and federal efficiency standards, such as variable speed pool pumps, cool roofs, ENERGY STAR® windows, HVAC systems, heat pump water heaters, and whole house fans. These upgrades can help lower energy bills, conserve resources, and improve home comfort. To qualify, applicants must

Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the DOE and BCAP websites.

Legislation signed in 2009 changed the process of adopting building codes in the state. Previously, the statewide code would only apply to local governments that had not already adopted a code, including less stringent codes. The code now applies to all jurisdictions, but local governments may adopt more stringent codes provided they notify the Office of Energy.

The

Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the DOE and BCAP websites.

Changes to the state energy code are submitted to the State Building Code Council (SBCC) on standardized forms. Code changes must be received by March 1 of each year. The SBCC sends the change to a Technical Advisory Group (TAG) for review. The TAG members have varying expertise in the construction industry related to the proposed change. After

Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the DOE and BCAP websites.

The Oregon Energy Code amendments were most recently updated for both residential and non-residential construction in 2017 and 2019, respectively. 

The Oregon Residential Specialty Code (ORSC), Chapter 11, contains energy efficiency requirements for one- and two-family dwelling construction. The Oregon Structural Specialty Code (OSSC), Chapter 13, contains energy conservation requirements for buildings other than one- and two-family dwellings

NOTE: Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the DOE and BCAP websites.

The Rhode Island Building Code Standards Committee adopts, promulgates and administers the state building code. Compliance is determined through the building permit and inspection process by local building code officials and the State Building Commission. The local code official enforces the state building code. The State Building Commissioner enforces the code for all state buildings and buildings

Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the DOE and BCAP websites.

The Indiana Residential Building Code is based on the 2003 IRC with state amendments (eff. 9/11/05). This code applies to 1 and 2 family dwellings and townhouses. During the adoption process, certain seismic provisions were weakened, primarily affecting nine southwestern counties. Local jurisdictions may amend to make the code more stringent with state approval only.

The Building Code