Shopping for a home battery usually starts with the wrong question: "How big should it be?" The right question is smaller and more useful: "What do I actually want to keep running when the grid goes down, and for how long?" Answer that, and the size mostly picks itself.
This guide walks through the sizing math in plain English, with worked examples you can adapt to your own home. If you want a price for a system sized to your loads, get a solar quote — an installer will confirm the numbers against your panel, your wiring, and your utility's rules.
Most homeowners do not need to back up everything. They need to back up the things that matter during an outage: the fridge, lights, Wi-Fi, phones, and maybe a medical device, a well pump, or a single room of air conditioning. Installers call these critical loads, and they usually live on a separate backup panel so the battery feeds them first.
Write your own list before you shop. A typical essentials list looks like this:
What you leave off the list matters as much as what is on it. An electric range, an electric dryer, and an EV charger are the loads that turn a modest battery into a very large one. You can always run those from the grid when power returns; backing them up through an outage is a choice, and an expensive one.
Battery specs come down to two numbers, and confusing them is the most common sizing mistake.
Think of it as a water tank and a pipe. The tank (kWh) is how much water you have. The pipe (kW) is how fast it can flow out. A big tank with a narrow pipe runs a few things for a long time. A small tank with a wide pipe runs many things briefly.
Two more spec-sheet terms to know:
The sizing formula is simple once you have your list:
Usable battery size (kWh) = daily critical-load energy (kWh) × days of backup you want.
To estimate daily energy for a load, multiply its running watts by the hours it runs, then divide by 1,000. A refrigerator that averages 100 watts over 24 hours uses about 2.4 kWh a day. LED lights, a router, and phone charging together often add less than 1 kWh a day. Your utility bill shows total household use, but it will not split out critical loads — a plug-in meter on individual devices, or an installer's load audit, gives the real numbers.
Illustrative example — essentials only. Suppose your list is a fridge (about 2 kWh a day), lights, Wi-Fi, and device charging (about 1 kWh a day combined), plus a small medical device. That is roughly 3–4 kWh a day of critical loads. For one day of backup, a single 5 kWh usable battery covers it with room to spare. For two days, you are looking at roughly 10 kWh usable. These are examples, not guarantees — your fridge, your usage, and your climate will move the numbers.
Illustrative example — essentials plus cooling. Add a window air conditioner or mini-split running part of the day, and daily critical energy can climb to roughly 10–12 kWh. That is about a day of backup from one standard 13.5 kWh usable unit, and less if the cooling runs all day. This is why air conditioning is the load that most often pushes a system from one battery to two.
Illustrative example — whole-home backup. The average American home uses roughly 30 kWh a day across everything. Backing up the whole house for a full day therefore takes roughly 20–30 kWh of usable storage or more — two or more standard units — and multi-day whole-home backup quickly becomes a very large, very expensive system. Most homes that want whole-home coverage use load management instead: the system automatically sheds big loads to stretch the battery, or the homeowner accepts that backup means essentials, not everything.
Energy (kWh) decides runtime, but power (kW) decides whether a motor will start at all. Motors draw a brief surge when they switch on — often two to three times their running power. A well pump that runs at about 1 kW can briefly demand 2–3 kW at startup. A central air conditioner compressor is worse.
This is why a battery with plenty of energy can still fail to run your well pump: its continuous power rating, and its short peak rating, must clear the biggest startup surge on your backup panel. Check the spec sheet's continuous and peak power, and have your installer verify the locked-rotor (startup) draw of your largest motor loads. If the surge is too big, the options are a higher-power battery, a soft starter on the motor, or leaving that load off the backup panel.
Most residential batteries today fall in a fairly narrow band. Typical current models, from manufacturer spec sheets:
Two patterns are worth noticing. First, most single units cluster around 10–15 kWh usable — that is the industry's answer to "one day of essentials, or part of a day of whole-home." Second, modular systems (Enphase, Generac) let you start small and add capacity later, which is the honest answer to uncertainty about your needs. Specs change between model years, so confirm the current datasheet before you buy.
A battery can do two different jobs, and they size differently:
Many systems do both, but the backup requirement should set the floor. A battery sized only for evening self-consumption may be too small for the outage you actually bought it for. And remember that a battery is only a backup if it is backup-capable: some storage systems are designed for self-consumption only and cannot power your home during an outage. Confirm backup capability explicitly before you buy. Your electric utility's interconnection and backup rules also affect what you can install and how it must be wired.
A battery does not generate power — it stores it. Paired with rooftop solar, it stores daytime surplus for the evening and, during an outage, recharges from your panels each day the sun shines. That daily recharge is what turns a one-day battery into multi-day resilience, as long as the outage does not coincide with days of heavy cloud.
One fact surprises many homeowners: standard grid-tied solar panels shut off during an outage for safety, so solar alone does not keep your lights on. The battery, plus the backup gateway or hybrid inverter that disconnects your home from the grid, is what makes outage power possible. If you do not have a roof to work with, plug-in solar kits are a separate, much smaller option — they are not a substitute for a home battery system.
It is tempting to buy the biggest battery "just in case." Three reasons not to:
The better hedge against uncertainty is a modular system you can expand, or a backup plan that pairs a right-sized battery with a generator for long outages. Incentive programs can change the math, but they vary widely by state and utility — check the solar rebates and incentives directory for your area before budgeting, and treat any program figure as something to confirm with the program itself, not as a promise.
Honest limits, before you sign anything:

Bottom line: Size the battery to your critical loads and the outage length you want to ride through, check power as well as energy, and leave room to grow. A right-sized battery is the one that keeps the fridge cold, the lights on, and the Wi-Fi up through the outages you actually get — without paying for capacity you will never use.
This is general information, not electrical advice. Battery sizing depends on your home's loads, wiring, and utility rules — have a licensed installer verify the final system for your home.