Program Cascade Natural Gas - Conservation Incentives for New and Existing Homes
Category Financial Incentive
Implementing sector Utility
Last Update
State Washington
Administrator Lockheed Martin Energy and Environmental Services
Website https://www.cngc.com/energy-efficiency/residential-rebate-offerings/
Sectors Residential

Cascade Natural Gas offers conservation incentives to residential customers in Washington for efficiency measures in both new and existing homes. The incentives described here are the Washington program; Cascade's Oregon customers are served through Energy Trust of Oregon instead.

Eligibility. You must be a Washington Cascade Natural Gas customer on residential rate schedule 503. The home's primary heating fuel must be Cascade natural gas to qualify for space heating and weatherization incentives, and its water heating fuel must be Cascade natural gas for water heating incentives. Applications must be received within 90 days of the install date. Work must be done by a Washington-licensed contractor in good standing, except exterior entry doors, efficient thermostats and clothes washers, which may be self-installed with purchase receipts and photographs of the equipment label. Insulation and air sealing must be performed by a Cascade Trade Ally contractor.

New and existing homes, under the 2026–2027 measure list, for installs on or after March 15, 2026:

  • furnace — $1,600 at 95% AFUE or higher, $2,400 at 98% AFUE or higher
  • condensing boiler — $2,000 at 95% AFUE or higher; combination boilers do not qualify
  • tankless water heater — $1,000 at 0.95 UEF or higher
  • clothes washer — $100 for ENERGY STAR models
  • exterior entry door — $700, U-factor of 0.21 or less with a National Fenestration Rating Council label, non-sliding models only
  • efficient thermostat — $150 for a programmable 5-2, 5-1-1 or Wi-Fi enabled model

Existing homes only:

  • windows replacing single-pane — $25 per square foot
  • attic insulation — $2.50 per square foot; floor insulation $3.00 per square foot; wall or sloped ceiling insulation $5.00 per square foot
  • duct insulation — $2.50 per linear foot; duct sealing $1,000, where 30% or more of the supply ducts are in unconditioned space
  • prescriptive air sealing — $0.15 per square foot, installed together with non-duct insulation
  • whole house air sealing — $0.50 per square foot, requiring a minimum 400 CFM50 reduction verified by pre- and post-installation blower door testing
  • Existing Home Bundle A — $500 for any two separate insulation measures done at the same time, totaling at least 1,000 square feet
  • Existing Home Bundle B — $2,000 for Bundle A plus whole house air sealing

Bundles A and B are together limited to one per household for the lifespan of the installed measures. Check the program website for the current measure list, application forms and full terms, or call 866-626-4479.

Add new comment
Form goes here