Rebates

The City of St. George Energy Services Department (SGESD) offers a net metering program to its customers, and updated program guidelines and fees in September 2015.* 

Net metering is available to customers that generate electricity using photovoltaic (PV) systems. The net metering agreements available on the utility's website only pertain to PV, but wind and other renewable technologies may be eligible for net metering. If a customer wishes to participate in net metering with a wind system or other renewable technology, they should contact the utility. The utility may develop additional net metering agreements as needed. Similarly, the net metering

Public Act No. 06-187, enacted in 2006, required the Connecticut Office of Policy and Management, in consultation with several other state agencies, to adopt building construction regulations for state facilities. The construction standards must be consistent with or exceed the U.S. Green Building Council's LEED Silver rating for new commercial construction and major renovation projects, or receive a two-globe rating under the Green Globes USA design program, or other equivalent standard. The regulations state that the base minimum energy performance for all building projects must be 21% better than the Connecticut State Building Code or ASHRAE Standard 90.1-2004, whichever

Locally Assessed Renewable Energy Property

Solar photovoltaic (PV), including agrivoltaics and floatovoltaics, and wind energy facilities with a capacity of 2 megawatts (MW) AC or less are assessed locally for property taxes. Additionally, low impact hydro, geothermal, and biomass facilities with a capacity of 2 MW or less and which were placed in service prior to January 1, 2010, are also assessed locally for property taxes. In assigning value to renewable energy property, local assessors are required to use the cost approach outlined in the Assessors' Reference Library. Assessors must also examine the sales comparison and income approaches, both described in

Note: HB 2201 of 2015 requires the Public Utility Commission to investigate and adopt new net metering and interconnection rules. The bill prohibits cross-subsidization of ratepayers potentially caused by net metering tariffs and limits IOUs from allowing more than 3% of aggregate load to be generated by solar power. The Commission opened a new proceeding (GO 258.3) in September 2018 to investigate the state's net metering rules. The summary below describes the current net metering rules. 
Eligibility and AvailabilityNet metering in West Virginia is available to all retail electricity customers. System capacity limits vary depending on the

The South Carolina Public Service Commission (PSC) adopted simplified interconnection guidelines for small distributed generation (DG) in December 2006.  South Carolina's interconnection guidelines apply to Duke Energy Progress, Duke Energy Carolinas, and Dominion Energy. These guidelines address interconnection of renewable- energy systems and other forms of DG in three levels -

1. Streamlined interconnection process for a certified inverter based generating unit up to 20 kW
2. Fast Track for interconnection for systems larger than 20 kW up to 2 MW
3. For larger interconnection systems greater than 2 MW requiring interconnection study.

The customer may submit a formal Pre-Application Report request

Similar to Maryland's Local Option Property Tax Credit for Renewable Energy, Title 9 of Maryland's property tax code creates an optional property tax credit for high performance buildings. This statute allows counties and municipalities to provide a credit against the property tax for buildings which achieve at least a silver rating according to the U.S. Green Building Council's LEED standards, residential structures that achieve a silver rating under the International Code Council's National Green Building Standard (NGBS), or structures which meet other comparable green building ratings or guidelines approved by the State. The provision specifically adding the NGBS (as

With the passage of Initiative 937 in 2006, Washington became the second state after Colorado to pass a renewable energy standard by ballot initiative. Initiative 937, which was enacted as the Energy Independence Act (EIA), calls for electric utilities that serve more than 25,000 customers in the state of Washington to obtain 15% of their electricity from new renewable resources by 2020 and to undertake all cost-effective energy conservation. Investor-owned utilities, municipal utilities, rural electric cooperatives, and public utility districts are subject to this standard.* Of Washington's 62 utilities, 18 are considered qualifying utilities, representing about 80% of Washington's load

Ann Arbor's Living Carbon Neutrality Plan

The city plans to power their electrical grid with 100% renewable energy largely by implementing community choice aggregation. See the Climate Action Plan to learn more.

The Community Choice Aggregation (CCA) program is an agreement among stakeholders to allow local governments to procure power on behalf of their residents, businesses, and municipal accounts from an alternative supplier while receiving transmission and distribution services from their existing utility providers. CCA allows communities to have more control over the production of their energy, including integrating community values such as 100% renewable energy into their purchasing decisions. 

Idaho does not have a statewide net-metering policy. However, each of the state's three investor-owned utilities -- Avista Utilities, Idaho Power and Rocky Mountain Power -- has developed a net-metering tariff that has been approved by the Idaho Public Utilities Commission (PUC). The framework of the utilities' net-metering programs is similar, in that each utility's original program: (1) offers net metering to customers that generate electricity using solar, wind, hydropower, biomass or fuel cells; (2) limits individual system size to 100 kilowatts (kW); (3) limits aggregate net-metered capacity to 0.1% of the utility's peak demand in a baseline year (1996

Lease financing administered by the Department of Treasury provides funding for energy efficiency projects in state facilities operated by state agencies, authorities and institutions of the Commonwealth of Virginia. The Energy Leasing Program allows for the purchase of services and equipment required to develop, design, and install an energy efficiency project. Agencies can finance energy projects at a minimum of $100,000 and will make repayments over 12 or 15 year terms.

The funds can be used to finance projects with relevant energy efficient technology, such as lighting and motor efficiency upgrades, building envelope enhancements, distribution system improvements, and energy management