Rebates

San Bernardino County’s Solar Energy Development Standards include standards and permit procedures for the establishment, maintenance and decommissioning of solar energy generating facilities.

Setbacks: Solar energy generating equipment and their mounting structures and devices shall be set back from the property line either pursuant to the standards in the Land Use Zoning District, or 130 percent of the mounted structure height, whichever is greater.

Glare: Solar energy facilities shall be designed to preclude daytime glare on any abutting residential land use zoning district, residential parcel, or public right-of-way.

Night Lighting: Outdoor lighting within a commercial solar energy generation

Solar collectors may extend up to seven feet above the maximum height limit with unlimited roof coverage. Solar collectors may extend up to 15 feet above the maximum height limit, as long as the coverage does not exceed 20 percent of the roof area, or 25 percent if the total includes stair or elevator penthouses or screened mechanical equipment.

City of Fresno requires that the design of any new city-owned building containing at least 7500 square feet shall include an alternative design for installation of a solar energy system.

The report to Council for each award of a contract for a new city-owned building shall include information related to compliance with this section every other year.

Each of the following is exempt from application of this section:

· A building for which the design is 30% or more complete on or before the effective date of this section.

· A building for which another renewable energy source(s) is available

Small Wind Energy Systems:

The standards are applicable for small wind energy systems consisting of a wind turbine, a tower, and associated control or conversion electronics, which has a rated capacity of not more than 100 kW and which is intended to primarily reduce on-site consumption of utility power.

Small wind energy systems shall be permitted ("P") by right in the following zoning districts C-3, L, I-1, I-2, MI-1, MI-2, O-2, ED, FR, QD and SGD. Small wind energy systems shall require specific use authorization ("S") in all residential base zoning districts and neighborhood preservation districts as well as the

Note: These programs currently do not have additional funding available. Please check the website and sign up for email updates to hear about future funding opportunities.

The Washington State Department of Commerce’s Energy Retrofits for Public Buildings program offers two grants for the improvement of public buildings. These grants provide funding for public entities such as towns, cities, tribes, and public agencies to make energy updates to public buildings and facilities such as schools, hospitals, community centers, affordable housing, and wastewater treatment plants. The program includes grants for energy efficiency and solar for state and local governments. At least 20%

The City of Baltimore provides low interest loans to non-profits and for-profit small businesses located in the City of Baltimore. The City has partnered with two non-profit organizations- Healthly Neighborhoods and Reinvestment Fund- to administer the loans. The loans can be used to finance a wide range of energy measures including insulation, windows, HVAC systems, lighting, and distributed generation systems such as solar PV systems and combined heat and power systems.

Eligibility

The building for the energy efficiency project must be located within the New Markets Tax Credit eligible census tract or a Baltimore Main Streets District. The mapping

NOTE: The Climate Leadership and Community Protection Act (CLCPA), enacted in July 2019, sets targets of 70% renewable electricity by 2030, and 100% carbon-free electricity by 2040. This act requires the state Public Service Commission to develop a regulatory program to meet these targets by June 30, 2021. The Public Service Commission adopted rules to meet the expanded targets in October 2020.

The New York Public Service Commission (PSC) adopted a Clean Energy Standard (CES) in August 2016, instituting a timeline for the load serving entities* (LSE) in the state to procure at least 50% of the electricity consumed in

H.B. 8354, enacted on July 2016, included a provision exempting qualifying renewable energy systems and associated equipment used in residential and manufacturing sector from property taxes throughout the state. Eligible renewable energy resources include direct solar radiation, wind, ocean, geothermal, small hydro, eligible biomass fuels, and fuel cells using renewable resources. 

Renewable energy equipment used in commercial facilities is not included in the exemption. However, legislation amended R.I. Gen Law §44-3-9 adding renewable energy equipment to qualify for tax stabilization, which may apply to commercial facilities. This authorizes local governments in Rhode Island to provide tax stabilization agreements for renewable

In 2010, the Federal Housing Finance Agency (FHFA), which has authority over mortgage underwriters Fannie Mae and Freddie Mac, directed these enterprises against purchasing mortgages of homes with a PACE lien due to its senior status above a mortgage. Most residential PACE activities subsided following this directive; however, some residential PACE programs are now operating with loan loss reserve funds, appropriate disclosures, or other protections meant to address FHFA's concerns. Commercial PACE programs were not directly affected by FHFA’s actions, as Fannie Mae and Freddie Mac do not underwrite commercial mortgages. Visit PACENation for more information about PACE financing and

Note: The initial application deadline for the Renewable Energy Manufacturing Program was June 30, 2016. Applications will be accepted following that date only if there are remaining funds available for interest cost subsidies.

The Washington Economic Development Finance Authority (WEDFA) and the Washington State Department of Commerce (Commerce) are jointly offering a two-part financing program for renewable energy manufacturing projects. The first component is bond financing through WEDFA, and the second component is an interest cost subsidy from Commerce. Projects must qualify for WEDFA Bonds before receiving an interest cost subsidy. Borrowers must arrange for the ultimate source of credit