Rebates

State Green Building Standards
Illinois requires that all new state-funded construction or major renovations are required to seek LEED, Green Globes, or equivalent certification. The Green Buildings Act (July 2009) defines major renovations as projects with a budget of at least 40% of a building's replacement cost and makes the following requirements based on the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED) rating system:

• New buildings and major renovations of less than 10,000 square feet must meet the highest LEED standard (or equivalent standard) that is practical. Certification is not required.
• New buildings and renovations of

San Francisco adopted a mandatory green building code for new construction projects in September 2008, establishing strict guidelines for residential and commercial buildings according to the following schedule:

The City of Chamblee, Georgia requires all of its new municipal buildings over 5,000 square feet of occupied space or one million dollars in cost to be certified under LEED (Leadership in Energy and Environmental Design) standards. Buildings under 5,000 square feet or one million dollars may be certified under Energy Star or EarthCraft Light Commercial standards in lieu of LEED. Additionally, other projects may be certified by programs other than LEED if approved by the Planning and Development Director. Renovations must also follow LEED guidelines, or other programs if LEED certification is not feasible.

The City of Chamblee also

In June 2008, the Governor of Indiana issued an Executive Order establishing an energy efficient state buildings initiative. The order requires the Indiana Department of Administration (DOA) to develop design standards for all new state buildings that require a cost-effectiveness analysis of the building with a goal of achieving energy efficiency. These rules apply to all state agencies, departments, boards, offices, commissions, and public universities. 

The DOA has incorporated the requirements of the Executive Order into Indiana's standard instructions to designers for projects on state-owned buildings. Efficiency can be demonstrated through adherence to any of the following standards:

• A rating

In May 2013, Oklahoma enacted H.B. 1990, repealing the high-performance building certification program.

The State is still required by statute to adopt planning and construction standards for state buildings that conserve energy and optimize the energy performance of new buildings. The standards must reduce dependence on imported sources of energy through energy efficiency and local and renewable energy sources.

The standards must also authorize the Office of Management and Enterprise Services to pursue ENERGY STAR designation to demonstrate energy efficiency in public buildings. 

Note: As of July 2023, Missouri state facilities under construction or renovation, and commercial buildings purchased or leased by state agencies, must comply with the 2015 IECC, pursuant to the Section 8.812 requirement that standards be at least as stringent as the latest version of the IECC.

Energy Conservation Goals

In April 2009 Missouri’s Governor issued Executive Order No. 09-18, requiring all state agencies whose building management falls under the Office of Administration to adopt policies designed to reduce energy consumption by 2% each year for the next 10 years.

Building Construction and Renovation Requirements

Life-Cycle Analysis

Life-cycle cost analysis

The Ohio School Facilities Commission (OSFC) administers funds appropriated by the Ohio General Assembly for the construction of new schools and renovations of existing schools. In September 2007 the OSFC approved a resolution (Resolution 07-124) requiring that all new school construction projects not already in the design phase achieve LEED for Schools Silver certification, with a goal of achieving LEED for Schools Gold certification. Credits under LEED Energy and Atmosphere Category are considered to be "preferred" investments, although the regulation sets no specific standard for this category outside of the existing certification prerequisites.

The overall program is expected

In January 2008, New Jersey enacted legislation mandating the use of high performance green building standards in new state construction. The standard requires that new buildings larger than 15,000 square feet constructed for the sole use of state entities should be designed and managed to meet high performance green building standards. The law allows for exceptions from specific requirements in cases of practical difficulty. These exceptions only apply to the specific requirement in question and do not extend to all requirements. With some exceptions the state is also required to purchase Energy Star products when available, a provision adopted in

In March 2008, South Dakota enacted legislation mandating the use of high-performance building standards in new state construction and renovations. The law was updated in 2021, lessening the previous standards and removing the requirements for renovations. The policy now requires that new state buildings achieve the U.S. Green Building Council's LEED certified rating (decreased from silver rating), a two-globe rating under the Green Building Initiative's (GBI) Green Globe rating system, or a comparable numeric rating from another accredited sustainable building certification program. The law applies to all new construction projects by state agencies, departments, or institutions that has a cost

In January 2007, the City of Plano adopted a policy to "finance, plan, design, construct, manage, renovate, and maintain its facilities and buildings to be sustainable." This policy applies to new construction and major renovations. Return on investment will be considered when determining feasibility of implementing green features. 

Design elements will be prioritized based on their ability to provide future energy savings, water conservation, waste reduction, and improved indoor air quality. Key factors to consider incorporating into the design include:
1. Use of passive solar energy
2. Natural lighting (day lighting) and adjustable lighting systems
3. Highly reflective roof and